跳至主要内容

What are the Advantages of Glass Wool?

Glass wool has many advantages such as non-combustibility, non-toxicity, corrosion resistance, small bulk density, low thermal conductivity, strong chemical stability, low moisture absorption, good hydrophobicity, etc. It is currently recognized as a superior thermal insulation, heat insulation and sound absorbing material. Wide range of uses. The boards, felts and pipes made of this material have been widely used in the fields of construction, chemical industry, electronics, electric power, metallurgy, energy, transportation and other fields for thermal insulation, sound absorption and noise reduction, and the effect is very significant. Glass Wool Manufacturerintroduces the advantages of glass wool.

1. Thermal insulation
Huamei glass wool slag ball has low content and slender fibers, which can effectively confine air and make it unable to flow, preventing convective heat transfer of air, greatly reducing the thermal conductivity of the product, and at the same time rapidly attenuating the transmission of sound. Excellent thermal insulation, sound absorption and noise reduction.
2. Good thermal stability
Huamei glass wool has good high-temperature thermal stability, durability and ability to resist high-temperature shrinkage; it can maintain safety, stability and high performance for a long time in the recommended operating temperature range and under normal working conditions.
3. Different lasting moisture resistance
Hydrophobicity is the ability of a material to resist water penetration. Huamei glass wool has a water-repellent rate of not less than 98%, which makes it have more consistent and stable thermal insulation performance.
4.Good fire resistance
Tested in accordance with GB 8624-2012, Huamei glass wool is a non-combustible Grade A material.
Glass Wool
Glass Wool

Finally, the Rubber Foam Insulation Factory will introduce the precautions for glass wool construction.

Roof construction
1. When laying glass wool roll felt, the veneer faces the indoor side and is perpendicular to the purlin, leaving an extra 20 cm of roll felt on one side of the eaves, and fix it on the outermost purlin with special clamps or double-sided tape.
2. When unwinding, ensure the alignment and tension. Lay the glass wool roll felt to the other eaves. Leave 20 cm more roll felt, and fix it on the outermost purlin with special clamps or double-sided tape.
3. The two rolls of cotton are connected by a stapler binding method on the veneer flash.
4. Install the roof color steel plate, remove the special fixture at the eaves, and use the reserved 20 cm veneer to close the glass wool.
5. Pay attention to the tension and alignment of the glass wool roll felt, and the seams between rolls are tight. When overlap is required in the longitudinal direction, the overlap joints should be installed at the row of purlins.
6. According to the needs of the project, in order to avoid the occurrence of cold bridges, you can consider padding some hard insulation materials on the purlins.

Wall construction
1. The veneer faces the indoor side, unwind from the eaves to the foot of the wall, and fix the glass wool to the bottom purlin with double-sided tape, leaving 20 cm more.
2. Cut the glass wool roll felt 20 cm above the top of the wall and fix it with double-sided tape.
3. Close the glass wool and install the color steel plate on the wall.
4. The two rolls of cotton are connected by a stapler binding method on the veneer flash.
5. Pay attention to keeping the glass wool rolls tight, aligned, vertical, and the seams between rolls tight.

These are the advantages of Glass Wool and the considerations for glass wool construction.

评论

此博客中的热门博文

Do You Know What the Use of Glass Wool Insulation Material Is?

  From the present day, we can see that   Glass Wool   insulation material is used in many aspects of daily life. Its thermal insulation properties make it widely used in daily life or work. The most common is that in colder winters, people can use this product to wrap their own water pipes. This can ensure that their water pipes are not frozen, and then the water between them can be kept flowing for as long as possible.  Glass Wool Because of its shearability, glass wool insulation materials can be trimmed according to their own needs, and products of different sizes can be cut and used in different places. For example, in this relatively cold place in the Northeast, people can wrap this product on their own roofs, make their houses adhere to a certain temperature, and fully play the role of heat insulation of this product, bringing comfort and comfort to their lives. convenient. In addition, glass wool insulation materials are also used more locally. With the extensive use of this in

Neoprene vs EPDM: What's the Difference?

  Both neoprene and   EPDM   are materials used in the manufacture of conveyor belt systems. While neoprene is most commonly used in the industry, many companies are turning to EPDM because using it overcomes many of the challenges associated with using neoprene.   What is neoprene? Neoprene is made through the polymerization of chlorine. Characterised by its chemical stability, flexibility over a wide range of temperatures and resistance to degradation, the material was originally intended as a petroleum-based alternative to natural rubber.   Its durability and flexibility make neoprene suitable for a wide range of everyday products - such as sports and medical equipment, technical coverings and sleeves, diving suits and safety gloves - as well as for a variety of outdoor applications - including as hoses, gaskets, seals, and gaskets. -including as hoses, gaskets, seals, coatings and linings.   Huamei  EPDM rubber foams  include semi-closed cell supersoft and supersoft foams; closed c

What Is the Difference Between Extruded Board and Foam Board?

  Extruded plate  (XPS), based on polystyrene resin as raw material, through a special process of continuous extrusion foaming molding hardboard, its internal structure for independent closed bubbles, is one kind has high pressure, water absorption, moisture, breathable, lightweight, corrosion resistance, long service life, low coefficient of thermal conductivity, excellent environmental protection heat preservation material performance. Extruded polystyrene (XPS) insulation board is widely used in wall insulation, flat concrete roof, and steel structure roof insulation, low-temperature storage ground, parking platform, airport runway, highway and other fields of moisture-proof insulation, and control ground frost heave. 1. Excellent and long-lasting thermal insulation The extruded board has a thermal conductivity of 0.028w/MK, which has the characteristics of high thermal resistance and low linear expansion rate. Its thermal conductivity is far lower than other insulation materials su